From flow data to measurable decisions

Review questions

Module synthesis: the evidence chain from flow to decision

A sound analytical chain begins with a specific question and data organized to answer it. An order records a commitment; a shipment records execution; delivery and acceptance establish what arrived and became usable. Event-row count is therefore not order count, and completed shipments do not establish that every due order succeeded. Fix the due-date cohort and original commitment before distinguishing order success, units accepted on time and quantity covered by the reporting cutoff. The first case produced different percentages because lateness and damage affect different questions, not because one of the divisions was wrong.

Before converting a result into a plan, reconcile opening and closing inventory using movements in consistent units. A retransmitted message is not another receipt, and a missing movement does not become established merely by forcing a balance to match a count. Explain discrepancies with evidence, then separate physical stock from availability. Check overlapping reservations and inspection states and account for goods in transit within the declared boundary. Lead time also needs a definition: first acceptance is not order completion when production requires the entire quantity. Event occurrence and information availability support different historical views.

Average demand does not establish regularity. Examine spread, temporal sequence and the occurrence of positive demand while keeping missing records distinct from verified zero demand. Consumption-value ranking describes where spend concentrates; it does not measure the consequence of losing a critical part. Choose follow-up for the decision: working-capital attention, alternative-source readiness or investigation of intermittent demand, rather than assigning one universal policy to every category letter.

When comparing performance, examine who handled which work. Mix can reverse supplier rankings. Common-weight calculations help answer a declared future-mix question, while raw rates still describe actual operations. A difference between treated-site change and comparison-site change is a calculation with causal assumptions, not automatic proof. Concurrent changes remain competing explanations. Account for overlapping failure causes so one failed order is not counted twice, and do not multiply marginal success rates as though their independence were established.

Finally, connect service with the costs changed by the decision. Full order contribution differs from the incremental value of protecting an existing commitment; expediting can improve a decision while the order remains economically weak. Test break-even conditions, probability assumptions, capacity and genuine opportunity costs, then compare eligible portfolios within budget. A defensible decision connects definitions, data, calculations and constraints and specifies what to measure after execution rather than labeling projected benefit as realized savings.

Review questions

Test your understanding with these questions. Marking and saved results are available with a free account.

  1. Question 1Which pair gives order service followed by the percentage of units accepted on time?
  2. Question 2Fictional stock opens at 50 pieces, receives two cartons of 15 and dispatches 20. There are no adjustments or duplicates. Ten closing pieces are reserved and five others are under inspection, without overlap. How many are available now?
  3. Question 3Three fictional items have descending consumption values of 60, 30 and ten. The local top-category threshold is 80%, including the item that crosses it. Which items enter?
  4. Question 4A fictional supplier succeeds on 90% of easy-route and 60% of difficult-route orders. What is its standardized rate for a mix of 40% easy and 60% difficult?
  5. Question 5Two fictional alternatives share an unrecoverable past cost of 500. Expediting costs an additional 40 now and avoids expected loss of 70. What is its incremental benefit?
  6. Question 6Forecasts issued before three periods are10,14,12, and actual demand is12,10,14. Define error as actual minus forecast. What are MAE and mean signed error?
  7. Question 7In a sales model without substitution or backorders, sales and availability are both80. A separate model predicts demand110. What do sales alone establish?
  8. Question 8Daily demand mean is ten and standard deviation two. Lead time is fixed at four days and daily demands are independent. What is lead-time demand standard deviation?
  9. Question 9At review, order-up-to level is150, on hand40, outstanding70 and backorders ten. Purchases must be in packs of15. What order is executable?
  10. Question 10Week-two demand is120, dedicated opening stock20, normal weekly capacity70 and external capacity20. Prebuilding is prohibited. What is the position before changing any date?
  11. Question 11A plan sends40 A–North at cost two, ten A–South at five and30 B–South at one. What is total transport cost?
  12. Question 12A center has activation80 and transport160. Two regionals together have activation120 and transport80. Both designs are eligible and capacitated. Which has lower total cost?
  13. Question 13In a stable M/M/1 with λ=4 and μ=6 per hour, what is queue waiting after removing service time from total system time?
  14. Question 14Two market demands have standard deviations three and four with correlation zero. What is the standard deviation of their sum over the same period?
  15. Question 15Expected acceptance yield is90%. Buying112 gives expected accepted100.8. Which statement correctly describes a100-unit requirement?
  16. Question 16Demand is 60 A needing two components each and 40 B needing one. Both assemblers share a factory. Component stock is 100 and all B has priority. What production is feasible?
  17. Question 17Expected X cost is 100+200 p and Y 140+40 p. p is outage probability. What is the break-even threshold?
  18. Question 18Opening stock 20, backlog 10, receipt 30 and new demand 50. Dispatch is unlimited and unmet demand is deferred. What are closing balances?
  19. Question 19Portfolio costs across two states are X 4,18 and Y 8,10. No probabilities are given and both are feasible. Which minimises worst cost?
  20. Question 20An order for 40 is sent and the response fails.No authoritative ledger is yet available.What is the correct result status?
  21. Question 21First shipment is due 8 hours after disruption. After ledger restoration, reconciliation takes 2 hours and sequential preparation 1 hour. What is the latest ledger return?
  22. Question 22Demand A 50, B 50, supply 70. Minima A 30, B 10. Residual supply is proportional to residual demand. What allocation follows?
  23. Question 23Stock 120, demand 20/hour. At hour 2, forty have been consumed and twenty original units are quarantined. Alternative lead time is 2 hours. What is the latest gap-free activation?
  24. Question 24Intervention adds 40 served units against an assumed reference. Contribution is 2 per unit and extra spending 110. What is the net cost effect under these assumptions?
  25. Question 25Service floor 90 percent, cash limit 1000.S gives 92 percent for 1100 cash; T 88 percent for 800. With only these alternatives, what follows?